Checking The Installation; Removing The Appliance; Customer Service; Model Number (E-Nr.) And Production Number (Fd) - Gaggenau CX482611 Instructions D'installation

Masquer les pouces Voir aussi pour CX482611:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connect the lead wires to the junction box supply wires
3.
in proper phase.
1
2
3
Red wires
1
UL listed wire connectors
2
Green (or bare) ground wire (from appliance)
3
Cable from home power supply
4
Black wires
5
Junction box
6
Flexible conduit from appliance
7
– Black (L1) to black
– Red (L2) to red
– Green or bare to ground

Checking the installation

6 Checking the installation
Check if your unit is working properly after you have com-
Checking the installation
pleted the installation steps.
WARNING
Before you turn on power supply, make sure all controls
are in the OFF position.
Remove everything from the cooktop surface including
1.
stickers.
Clean the cooktop surface with cooktop cleaning cream.
2.
Switch on the circuit breaker.
3.
Verify that all cooking zones function properly.
4.
7 Removing the appliance

Removing the appliance

Disconnect the appliance from the power supply.
Removing the appliance
1.
For flush-mounted appliances, remove the silicone joint.
2.
NOTICE: Do not lever the appliance out from above at
3.
the frame.
Push out the appliance from below.
8 Customer Service

Customer Service

4
If you have any questions on use, are unable to eliminate
Customer Service
an issue in the appliance yourself, or the appliance needs
to be repaired, please contact our Customer Service.
With any warranty repair, we will make sure your appli-
ance is repaired by an authorized service provider using
genuine replacement parts. We use only genuine replace-
ment parts for all repairs.
Detailed information on the warranty period and terms of
5
warranty can be found in the Statement of Limited Product
Warranty, from your retailer, or on our website.
If you contact the Customer Service, you will need the
6
model number (E-Nr.) and the production number (FD) of
your appliance.
USA:
1-877-442-4436
7
www.gaggenau.com
www.gaggenau.com/us/appliances/eshop
CA:
1-877-442-4436
www.gaggenau.com
www.gaggenau.ca
For assistance with connecting to Home Connect™, you
can also view instructions here:
www.home-connect.com/us/en/help-support/set-up
8.1 Model number (E-Nr.) and production
number (FD)
You can find the model number (E-Nr.) and the production
number (FD) on the appliance's rating plate.
The model number (E-Nr.) can also be found on the glass
ceramic. You can also display the customer service index
(KI) and the production number (FD) in the Basic settings.
Making a note of your appliance's details and the Cus-
tomer Service telephone number will enable you to find
them again quickly.
8.2 Rating plate location
Refer to this section to see where the rating plate of your
appliance is located.
on the underside of the appliance
¡
in the appliance pass
¡
You can also check the Customer Service Index (CSI)
¡
and the FD number in the basic settings.
Checking the installation en-us
11

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Cx492611

Table des Matières