Setting Up The Burners; Operation; Turning On - Gaggenau VG 424 210 CA Notice D'utilisation

Setting up the burners

The burner parts must be positioned flat and so that
they fit perfectly in place, otherwise malfunctions may
occur with ignition or during operation. The latching
lugs must engage in the corresponding recesses.
Setting up the normal/high output burner
12

Operation

The markings on the control knobs show you the
power from a full to a small flame. The power is can be
adjusted continuously.
Notes
‒
%XUQHU OLG
‒
‒
%XUQHU ULQJ
‒
9
,QWHUPHGLDWH ULQJ
(OHFWURGH

Turning on

Your gas cooktop has automatic fast ignition.
1
2
Only light cooking positions when the pan
support and all burner parts are correctly
positioned.
The burner and electrode must be clean and dry.
Only use the specified accessories. Do not line
stainless steel cooktop (e.g. with aluminum foil).
Do not cover up the gas cooktop's ventilation
openings under the pan support.
CAUTION
Heat damage to the range hood
Turn on a range hood when the gas cooktop is
in operation. An appropriately high-output range
hood must be selected for using multiple
cooking zones. Provide for sufficient air supply.
Place an appropriate cooking vessel on the
required burner.
Push in the appropriate control knob and turn it
left to the desired position. The burner ignites
automatically.