Arcam AV860 Manuel page 25

BD/DVD Device Mode
The Device Mode button configures the remote to
BD
control the functions of Arcam Blu-ray Disc and DVD
players, although this can be changed. Pressing this
button also selects BD as the source.
2 Toggles power between standby and on.
1
Open/close disc tray.
0...9 Searches for and plays the track
corresponding to the key pressed when
playing a CD.
DISP Cycles through the front panel display's
brightness options.
MODE Cycles through the repeat options (track,
disc, etc.).
7
Fast rewind.
8 Fast forward.
9 Press and release to skip back to the
beginning of the current/previous track.
: Press and release to skip forwards to the
beginning of the next track.
Stop playback of a BD or DVD.
4; Pause and playback of the current track.
Start recording (on products that have this
feature).
Disc menu.
MENU
POP UP Activates BD/DVD player menu, if
available.
Navigate setup and BD/DVD programme
selection menus.
OK selects the highlighted file or enters
the highlighted menu on the screen –
equivalent to 'Enter' or 'Select' on some
remote controls.
' Up
< Left
> Right
, Down
+ ' Power on from Standby
BD
+ , Standby from Power on
BD
+ > changes the picture resolution (for
BD
BD, only on the Home screen).
Returns navigation to the top level of the
menu ('Home').
AUDIO Changes audio decode format (Dolby
Digital, DTS, etc.).
AMP Resets remote to AMP mode.
RED RED button for BD
GREEN button for BD
GREEN
YELLOW YELLOW button for BD
BLUE button for BD.
BLUE
AV Device Mode
The Device Mode button configures the remote to
AV
control the functions of a television or other display
device. You will need to configure this Device Mode to
work with your equipment. Pressing this button also
selects as the source.
AV
2 Toggles power between standby and on.
(Some TVs require you to use a number key
to turn them on).
Functions as original remote number key –
0...9
usually for channel selection.
DISP Display INFO or OSD (On Screen Display)
function, if available.
MODE AV; this function is TV specific.
9 Channel down.
: Channel up.
INFO Displays picture information; this function
is TV specific.
POP UP Guide.
Navigate setup and programme selection
menus.
confirms a selection (equivalent to
OK
'Enter' or 'Select' on some remotes).
Returns navigation to the top level of the
menu ('Home').
AMP Resets remote to AMP mode.
RED RED key for Text TV
GREEN key for Text TV
GREEN
YELLOW YELLOW key for Text TV
BLUE key for Text TV.
BLUE
E-23
VCR Device Mode
The VCR Device Mode button selects VCR as the source.
The VCR page allows code learning from a dedicated
VCR remote – see "customising the remote" on page
E-38.