Connection Guide; Satellite Receiver; Cd-Player - Arcam AV860 Manuel

Connection guide

Blu-ray Disc (BD)/DVD player
The diagram shows how to make audio and video
connections from a typical BD/DVD player.
The preferred audio hook-up is using the HDMI
or coaxial digital connector (usually marked
), in addition to the coaxial analogue
DIGITAL AUDIO OUT
outputs for left and right channels.
In each case, use the audio inputs labelled BD on the
Receiver.

Satellite receiver

A satellite receiver is connected in the same way as a BD
player, with the same order of preference according to
the outputs provided by the satellite receiver.
In each case, use the inputs labelled SAT on the Receiver.
Note that digital audio input from a satellite receiver
sometimes requires a coaxial/TOSLINK (digital
connector) interconnect cable, as some satellite receivers
do not implement audio over HDMI properly or at all.
CD player
Connect the digital audio output (if provided by the CD
player) to the digital input of the Receiver, using a
CD
high quality coaxial interconnect cable.
Connect the right and left analogue audio outputs of
the CD player to the analogue inputs of the Receiver,
CD
using a pair of high quality coaxial interconnect cables.
NOTE:
For each input, you must set the 'Audio Source'
setting according to the connection type. (see "Input
Config. " on page E-29)
STB/MHL GAME AV SAT BD VCR PVR
HDMI DIGITAL AUDIO
Z2 OUT STB GAME AV BD PVR CD SAT PVR
ANALOGUE AUDIO BD CD STB AV
HEIGHT 1 HEIGHT 2 OPTICAL
COAXIAL
L
SPEAKER OUTPUTS
ZONE 2 R 8Ω LOAD IMPEDANCE RECOMMENDED
HEIGHT 1 R
R
SBR SR FR C
SUB 2
PREAMP OUT
PREAMP OUT
FL SL C SBL
SBR SR FR C
FR SR SUB SBR
HEIGHT 1 R
ZONE 2 R
E-12
ZONE2 OUTPUT2 OUTPUT1
ARC
OUT
TRIG Z1 Z1 IR
FM/DAB
ETHERNET
RS232
USB 5V / 1A DC6V
1.2A MAX TRIG Z2 Z2 IR
ZONE 2 L
HEIGHT 1 L
FL SL SBL
~ 50 – 60 Hz 1.5KW MAX
115 230
FL SL SBL
HEIGHT1 L
ZONE 2 L
BD/SAT
Pr Pb Y