the setting. The setting applies to both mains power operation as well as battery
operation.
[Dim Setting] dims the display during operation and on standby (mains power
operation to the set value after the time set under [Shut-Off Time]).
[Operating Cycle] specifies the time after which the display during operation
drops to the value set under [Dim Setting]. If the [Off] setting is selected, the
display always remains at the brightness value set under [Operation].
In Standby (mains power operation), the display is always dimmed to the value
set under [Dim Setting].
11.6 Language
>
Press the MENU button and use the TUNE/SCAN knob to select the [System] >
[Language] option.
>
Use the TUNE/SCAN knob to select one of the available languages and confirm
the selection by pressing the TUNE/SCAN knob.
DE
EN
FR
IT
NL
NO
DK
PL
CZ
SK
123