Manual Station Scan; Scan Setting - TechniSat DIGITRADIO 230 OD Mode D'emploi

8.4 Manual station scan

> Turn the TUNE/SCAN knob to set the frequency in 0.05 MHz increments.

8.5 Scan setting

With this menu item you can set the sensitivity of the scan.
> Press the MENU button and use the TUNE/SCAN knob to select the [Scan
Settings] option.
> Select whether the scan should only stop for stations with a strong signal
[Strong Stations Only] or for all stations (including stations with a weak signal)
[All Stations].
With the All Stations setting, the scan stops automatically upon detecting each
available station. This can result in weak stations being played with background
noise.
108