Vibration Information; Starting Operation; For Your Safety - Bosch UniversalChainPole 18 Notice Originale

Cordless pole pruner
Pivoting head, 9 positions
Weight according to EPTA‑Procedure 01:2014
Serial number
Recommended ambient temperature during charging
Permitted ambient temperature during operation
Battery type
A)
Limited performance at temperatures <0 °C
Charger
Charging current
Charging period (battery discharged)
– Battery with 1.5 Ah
– Battery with 2.0 Ah
– Battery with 2.5 Ah
– Battery with 3.0 Ah
– Battery with 4.0 Ah
– Battery with 6.0 Ah
Weight according to EPTA‑Pro-
cedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Vibration information

Noise emission values determined according to EN 62841-1.
Typically the A-weighted noise levels of the product are:
– Sound pressure level
– Sound power level
– Uncertainty K
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-1
– Vibration emission value a
h
– Uncertainty K
That the declared vibration total value(s) and the declared
noise emission value(s) have been measured in accordance
with a standard test method any may be used for comparing
one tool to another.
That the declared vibration total value(s) and the declared
noise emission value(s) may also be used in a preliminary as-
sessment of exposure.
That the vibration and noise emissions during actual use of
the power tool can differ from the declared values depend-
ing on the ways in which the tool is used especially what kind
of workpiece is processed; and of the need to identify safety
measures to protect the operator that are based on an estim-
Bosch Power Tools
A)
and storage
AL 1810 CV
A 1.0
min 94
min 124
min 154
min 185
min 244
min 364
kg 0.17
/ II
dB(A)
dB(A)
dB
2
m/s
2
m/s
ation of the exposure measures in the actual conditions of
use (taking account of all parts of the operating cycle such as
the times when the tool is switched off and when it is running
idle in addition to the trigger time).

Starting Operation

For Your Safety

Before any work on the machine itself (e. g. mainten-
u
ance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
English | 19
UniversalChainPole 18
°
kg
See serial number (type plate) on
the machine
°C +10... +35
°C -20... +50
PBA 18V...W-.
1.5 Ah, 2.0 Ah, 2.5 Ah, 3.0 Ah, 4.0
Ah, 5.0 Ah, 6.0 Ah
AL 18V-20 CV AL 1830 CV
2.0
49
64
79
94
124
184
0.21
/ II
3 600 HB3 1..
F 016 L94 061 | (23.12.2020)
120
3.6
3.0
33
45
60
72
95
130
0.40
/ II
78
92
4.0
1.0
1.5