Technical Data; Circular Saw; Noise/Vibration Information; Declaration Of Conformity - Bosch GKS 36 V-LI Professional Notice Originale

OBJ_BUCH-304-006.book Page 17 Thursday, November 19, 2015 1:47 PM
5 Battery unlocking button
6 Battery pack*
7 Blade guard
8 Lever for retracting blade guard
9 Base plate
10 Retracting blade guard
11 Parallel guide
12 Cutting mark, 0°
13 Cutting mark, 45°
14 Wing bolt for parallel guide
15 Wing bolt for bevel-angle preselection
16 Scale for mitre angle
17 Spindle lock button
18 Auxiliary handle (insulated gripping surface)
19 Hex key
20 Saw spindle
21 Mounting flange
22 Saw blade*
23 Clamping flange
24 Clamping bolt with washer
25 Marks on the blade guard
26 Button for charge-control indicator
27 Battery charge-control indicator
28 Temperature control indicator
29 Cutting-depth scale
30 Clamping lever for cutting-depth preselection
31 Set of screw clamps*
32 Fastening screw for extraction adapter
33 Extraction adapter
34 Vacuum hose*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Circular Saw

Article number
Rated voltage
No-load speed
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Tooth thickness/setting, max.
Tooth thickness/setting, min.
*depending on the battery pack being used
** Limited performance at temperatures <0 °C
Bosch Power Tools
Circular Saw
Mounting bore
Weight according to EPTA-
Procedure 01:2014
Permitted ambient temperature
– during charging
– during operation
storage
Recommended batteries
Recommended chargers
*depending on the battery pack being used
** Limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-5.
Typically the A-weighted noise levels of the product are:
Sound pressure level 98 dB(A); Sound power level
109 dB(A). Uncertainty K =1.5 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745-2-5:
a <2.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
GKS 36 V-LI
period.
3 601 F73 ...
Identify additional safety measures to protect the operator
V= 36
from the effects of vibration such as: maintain the tool and the
-1
min 4000
accessories, keep the hands warm, organisation of work pat-
terns.
mm 54

Declaration of Conformity

mm 38
We declare under our sole responsibility that the product de-

scribed under "Technical Data" is in conformity with all rele-
mm 146 x 290
vant provisions of the directives 2011/65/EU, until
mm 165
19 April 2016: 2004/108/EC, from 20 April 2016 on:
2014/30/EU, 2006/42/EC including their amendments and
mm 160
complies with the following standards: EN 60745-1,
mm 1.7
EN 60745-2-5, EN 50581.
mm 2.6
Technical file (2006/42/EC) at:
mm 2.0
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
mm
kg
°C
**
and during
°C
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s .
1 609 92A 1SY | (19.11.15)
English | 17
GKS 36 V-LI
20
4.8/5.4*
0...+45
–20...+50
GBA 36V
AL 36..
GAL 36..