Connection Examples Multiple Switch - Brink Renovent Excellent 180 Consignes D'installation

Electric connections accessories

11.2 Connection examples multiple switch

A multiple switch can be connected to the modular connector X180 of the Renovent Excellent.
This modular connector is directly accessible from the top of the appliance (see §11.1) .
B
230 V
50 Hz
A = Renovent Excellent 180
B = Multiple switch with lter indication
230 V
50 Hz
B1 B2
230 V
50 Hz
C
A = Renovent Excellent 180
B1 = Multiple switch with lter indication
B2 = Additional multiple switch with lter indication
C = Splitter
A
B
A
A
Renovent Excellent 180
RJ12/6
Wire colours C1 - C6 may vary dependent on
the type of modular cable used.
Note: For the modular cable used, the "tab" of both modular
connectors must be mounted facing the mark on the
modular cable.
C D
A = Renovent Excellent 180
B = Receiver for wireless remote control
C = Transmitter with 4 settings
E
D = Transmitter with 2 settings
E = Any additional 2- or 4-settings
11.2.4 Additional multiple switch wireless remote control
B
230 V
50 Hz
A = Renovent Excellent 180
B = Multiple switch with lter indication
C = Receiver for wireless remote control
D = Transmitter with 2 settings
E = Splitter
Chapter 11
RJ12/6
B
(for instance the kitchen)
(for instance the bathroom)
transmitters (A maximum
of 6 transmitters can be signed
on to 1 receiver)
C
E
A
D
29