Message Text For Operating Mode - Brink Renovent Excellent 180 Consignes D'installation

Chapter 6

6.2.3 Message text for operating mode

This part of the display may show a message text. The
message text "Filter" always takes precedence over the
other message texts.
The following message texts may appear during operating
mode.
Message text
Description
on display
FILTER When the text "FILTER" appears
cleaned or replaced; for detailed
§ 9.1
Slave 1, Slave For coupled appliances the mes-
2 etc. sage text shows which appliance is
"Slave 1" - "Slave 9"; for detailed in-
The "Master" appliance displays
the regular layout regarding venti-
lation mode.
EWT When the text "EWT" appears
on the display, the geo-heat ex-
(Only for Plus changer is active.
version) For detailed information, also refer
to §11.8.
CN1 or CN2 When the text "CN1 or CN2" ap-
pears on the display, one of the ex-
(Only for Plus ternal switch inputs is active, also
version) see §11.6.
V1 or V2 When the text "CN1 or CN2" ap-
pears on the display, one of the
(Only for Plus external 0 - 10 V inputs is active,
version) also see§11.7.
16 Renovent Excellent 180
Display layout
Master - appliance
Slave - appliance