Application - Brink Renovent Excellent 180 Consignes D'installation

Application

The Brink Renovent Excellent is a heat recovery ventilation unit
180 m 3 /h and low-energy fans.
Features Renovent Excellent 180:
indication on the multiple switch;
door temperatures the appliance's performance remains op-
timal and that, if necessary, it activates the optional mounted
preheater;
The Renovent Excellent 180 is available in two types:
Compared to the standard Renovent Excellent 180, the Re-
novent Excellent 180 Plus has a more extensive control board
which increases the connection options.
Type
Renovent Excellent 180
Renovent Excellent 180 Plus
-
Version types Renovent Excellent 180
Version L or R Position air ducts
Left-handed version 4 top connections
Right-hand version 4 top connections
Left-handed version 4 top connections
Right-handed version 4 top connections
Renovent Excellent 180
These installation instructions describe both the standard Re-
novent Excellent 180 and the Renovent Excellent 180 Plus.
The Renovent Excellent (Plus) is available in a left-handed or
ducts differs for these two versions! For the correct position
of the connection ducts and dimensions see §3.4.1 or §3.4.2.
respectively.
When ordering an appliance always state the correct type; sub-
sequent conversion to a different version is not possible.
The Renovent Excellent 180 comes ready to plug in with a 230 V
mains plug and a connection for a low-voltage multiple switch
on the outside of the appliance.
Chapter 2
Power supply Type code
Power plug 4/0 L
Power plug 4/0 R
Power plug 4/0 L+
Power plug 4/0 R+
5