Chapter 7
7.1 Switching the appliance on and off
There are two methods to switch the appliance on or off.
- Switching on and off by inserting or pulling the power plug
- Switching on and off through software on the appliance display
Switching on:
Switching on the mains power:
Connect the 230 V power plug to the electric system.
All display symbols appear during 2 seconds.
The software version appears during 2 seconds.
Directly after that the Renovent Excellent will be running in
the mode as set on the multiple switch. If no multiple switch
is connected, the appliance will always run in mode 1.
Switching on through software:
When the Renovent Excellent is switched off through soft-
ware, the display will show the text "OFF".
The appliance can be switched on by pressing the '-' key
during 5 seconds.
20
2 sec.
2 sec.
> 5 sec.
Renovent Excellent 180
Putting into operation
Switching off:
Switching off through software:
Press the "-" key for 5 sec. to switch off the appliance through
software. The text 'OFF' appears on the display.
Switching off the mains power;
Pull the 230 V mains plug from the mains to take the voltage
from the appliance.
Nothing is shown on the display now.
Warning
When working on the appliance, always take
it off through software and subsequently pulling
the power plug.
>5 sec.