Ec Declaration Of Conformity; Manufacturer's Warranty - STEINEL XLED home 2 Z-Wave Mode D'emploi

Z-Wave control dial (Fig. 5.1/F)
Control dial for inclusion and
exclusion as well as for returning
the device to the factory setting.
Adding XLED home 2 to the Smart Friends
system:
1 Download the Smart Friends app from the
app store.
2 In the rooms view, activate the edit mode.
3 Select the chosen room and press the "Add
device" button.
4 To put the device into inclusion mode, turn the
device's control dial to "Set" and back to
"0" within 5 seconds. The status LED lights
up to show that this mode is selected.
5 The app displays a confirmation message once
inclusion has been successfully completed.
Removing XLED home 2 from the Smart Friends
system:
1 In the rooms view, activate the edit mode.
2 Select the device in the chosen room and
press the "delete" button. Press delete and
follow the instructions in the app.
To put the device into exclusion mode, turn the
3
device's control dial to "Set" and back to
"0" within 5 seconds. The red status LED
lights up to show that this mode is selected.
4 The app displays a confirmation message once
exclusion has been successfully completed.
Setting XLED home 2 with the app
– After programming, an ON/OFF scene is auto-
matically created in the app.
– The following setting values are then automati-
cally stored:
a) Twilight setting = control-dial setting
b) Time setting = 3 min switch-OFF delay
– The twilight and time settings can be selected to
the accuracy of one lux and one second respec-
tively in the "Scene" menu.
Resetting XLED home 2 to the factory
settings:
Please only perform these steps if the main net-
work controller is missing or not working for other
reasons.
1 Turn the device's control dial to "Set" and
move it to "Reset" within 5 seconds.
2 The status LED briefly flashes to show that
the light has been reset.
3 The device is now no longer included in the
Z-Wave system and has been returned to
factory settings.
Note:
The current firmware version for the light is available
for downloading from z-wave.steinel.de.
8. Operation/maintenance
The unit is not suitable for burglar alarm systems as
it is not tamperproof in the manner prescribed for
such systems. Weather can affect the operation of
the sensor-switched LED floodlight. Strong gusts
of wind, snow, rain and hail may cause the light
to come ON when it is not wanted because the
sensor is unable to distinguish between sudden
changes in temperature and sources of heat.
The detector lens may be cleaned with a damp
cloth if it gets dirty (do not use cleaning agents).
9. Disposal
Electrical and electronic equipment, accessories
and packaging must be recycled in an environmen-
G B
tally compatible manner.
1
Do not dispose of electrical and electronic
Y E A R
equipment as domestic waste.
MANUFACTURER'S
WARRANTY
EU countries only:
Under the current European Directive on Waste
Electrical and Electronic Equipment and its imple-
mentation in national law, electrical and electronic
equipment no longer suitable for use must be
collected separately and recycled in an environ-
mentally compatible manner.
– 16 –

10. EC Declaration of Conformity

Hereby, STEINEL Vertrieb GmbH declares that the
radio equipment type XLED HOME 2 Z-WAVE is in
compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at
the following internet address: www.steinel.de

11. Manufacturer's warranty

This STEINEL product has been manufactured with
utmost care, tested for proper operation and safety
and then subjected to random sample inspection.
Steinel guarantees that it is in perfect condition
and proper working order. The warranty period is
5 years and starts on the date of sale to the con-
sumer. We will remedy defects caused by material
flaws or manufacturing faults. The warranty will be
met by repair or replacement of defective parts at
our own discretion.
The warranty shall not cover damage to wear
parts, damage or defects caused by improper
treatment or maintenance. Further consequential
damage to other objects shall be excluded.
Claims under the warranty will only be accepted
if the unit is sent fully assembled and well-packed
with a brief description of the fault, a receipt or
invoice (date of purchase and dealer's stamp) to
the appropriate Service Centre.
Service
Our Customer Service Department will repair faults
not covered by the warranty or after the warranty
period has expired. Please send the product well-
packed to your nearest Service Centre.
5
3
Y E A R Y E A R
MANUFACTURER'S MANUFACTURER'S
WARRANTY WARRANTY
– 17 –