Before You Begin - GE GLE12HSLSS Manuel D'utilisation Et Instructions D'installation

Accessory Installation Instructions
INSTALLING IM4D ICEMAKER KIT

BEFORE YOU BEGIN

Read these instructions completely and carefully.
WARNING
To eliminate the risk of
electric shock or injury during installation,
you must first unplug the refrigerator
before proceeding.
YOU WILL NEED
Flat blade and Phillips
screwdrivers
PREPARE THE REFRIGERATOR
Inside of the freezer,
remove the cover for the
icemaker power supply
socket.
49-60769
Pliers Sharp knife
Cover for
icemaker
socket
SET POWER SWITCH TO OFF
Set the icemaker power switch to OFF.
Power
Switch
(Appearance may vary)
INSTALL THE ICEMAKER FILL CUP
Install the icemaker fill cup (13) into the icemaker
as shown.
PLUG IN THE ICEMAKER
Plug the icemaker power cord into the socket making
sure the prongs and holes are matched. Press the
plug firmly into the socket.
Lock the plug in place by
clipping the restraints into
each side of the plug. Make
sure the restraints click into
place. Make sure the power
cord is still in the hook on
back of the icemaker.
Hook
19