GE GLE12HSLSS Manuel D'utilisation Et Instructions D'installation page 18

If you have questions, call GE Appliances at 1.800.GE.CARES or visit our Website at:
GEAppliances.com. In Canada, call 1.800.561.3344 or visit our Website at: www.geappliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT –
•
local inspector's use.
IMPORTANT –
•
and ordinances.
Note to Installer –
•
instructions with the Consumer.
Note to Consumer –
•
for future reference.
• Skill level – Installation of this appliance requires
basic mechanical skills.
• Completion time – 20–60 minutes
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
Damage – Shipment/Installation
● I f the unit is damaged in shipment, return the unit
to the store in which it was bought for repair or
replacement.
● I f the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
● I f the unit is damaged by the installer (if other than
the customer), repair or replacement must be made
by arrangement between customer and installer.
18
Accessory Installation Instructions
Save these instructions for
Observe all governing codes
Be sure to leave these
Keep these instructions
ITEMS NEEDED FROM IM4D KIT
1
Icemaker
2 Installation Instructions
3
Water Valve and
Tube Assembly
5 Hex-Head Screw
for Water Line Clamp (3/4")*
6
Water Line Clamp
(strain relief), for
house water line
ICEMAKER
WARRANTY VERIFICATION
Date Installed
Dealer
7 Warranty Label
8
Ice Bucket
10 Phillips Head Screws,
for mounting icemaker (2)
(7/8")*
Icemaker Fill Cup
13
(side-mounted)
16
Bracket Extension
Hex-Head Screws, for
17
bracket extension (1)
(1/4")*
49-60769