Energy Saving Mode - DURAVIT SensoWash Slim Notice D'utilisation

Energy saving mode

Timed energy saving mode is to save energy at a desired point of
time, e.g. at night.
When the timed energy saving mode gets activated, the seat
heating is deactivated for the next 8 hours and then gets auto-
matically reactivated for 16 hours. This procedure is repeated at
the same time every day until the energy saving mode gets
deactivated.
Press the following button combination just at the desired time
when the 8 hour saving period should start to cycle through the
timed energy saving mode settings.
Therefore, the stop button has to be pressed constantly.
1
> Press and
hold Stop.
Status LED is illuminated green: Off
Status LED is illuminated orange: On
To change the point of time of the "Timed energy saving mode",
deactivate the "Timed energy saving mode" and set it again at your
desired time .
To deactive the seat heating permanently, see chapter 6.3.
Auto energy saving mode
If all SensoWash
auto energy saving mode will activate automatically. The seat
heating is now inactive. When any SensoWash
the auto saving energy mode will be deactivated again and the
previous settings will be automatically reactivated.
2
> Press Seat
Temperature.
functions have been inactive for 48 hours, the
®
function is used,
®
EN
21