Activating / Deactivating The Energy Saving Mode; Rearwash - DURAVIT SENSOWASH Darling New 610001 Notice D'utilisation

Activating / deactivating the energy saving mode

> Press the "Power" button
SensoWash enters the energy saving mode.
®
The status display
> Press the "Power" button
SensoWash returns to the normal mode.
®
The status display
When the energy saving mode is activated, the seat heating is deactivated for the
next 8 hours then can then be automatically reactivated for 16 hours. This procedure
is repeated at the same time every day until the energy saving mode is deactivated.
If all SensoWash functions have been inactive for 48 hours, the auto saving mode will
®
activate automatically. The seat heating is now inactive. When any function is used, all
previous settings will automatically be reactivate.
To deactivate the seat heating permanently, press the "Temperature" button
the remote control.

Rearwash

> Press the "Rearwash" button
The spray wand extends and sprays a jet of water.
> Press the "Rearwash" button
The oscillation function starts.
> Press the "Rearwash" button
The spray wand retracts and the current function stops immediately.
E on the seat unit for less than 2 seconds.
D turns green.
E on the seat unit again for less than 2 seconds.The
D turns red.
B on the seat unit.
B on the seat unit again.
B on the seat unit again.
EN
10 on
13