Cleaning The Remote Control; Troubleshooting - DURAVIT SENSOWASH Darling New 610001 Notice D'utilisation

The spray wand cleans itself.
The spray wand is flushed with water in the concealed position.
> Press the "Stop" button
> Now press the "Comfortwash" button
The current function stops immediately.
The function is automatically terminated after 5 minutes or when the seat sensor is
activated.

Cleaning the remote control

> Only clean the remote control with a soft, damp cloth.

8. Troubleshooting

Does a fault exist? As soon this question arises, please refer to this chapter section
carefully and try out the potential solutions described in the following. If your unit does
still not work properly, please contact your local customer service. Have the article and
serial number ready. These can be found on the label on the back of your SensoWash
5 again and hold this pressed.
14
.
EN
.
®
21