DURAVIT SensoWash Slim Notice D'utilisation page 11

For all grounded, cord connected products:
GROUNDING INSTRUCTIONS
This product should be grounded. In the event of an electrical
short circuit, grounding reduces the risk of electric shock by
providing an escape wire for the electric current. This product is
equipped with a cord having a grounding wire with a grounding
EN
plug. The plug must be plugged into an outlet that is properly
installed and grounded.
Improper use of the grounding plug can result
DANGER
in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not
connect the grounding wire to either flat blade terminal. The wire
with insulation having an outer surface that is green with or wit-
hout yellow stripes is the grounding wire.
Check with a qualified electrician or serviceman if the grounding
instructions are not completely understood, or if in doubt as to
whether the product is properly grounded.
This product is for use on a nominal 120 V circuit, and has a
grounding plug that looks like the plug illustrated in sketch A in
Figure 75.1. A temporary adapter, which looks like the adapter
illustrated in sketches B and C, may be used to connect this plug
to a 2-pole receptacle as shown in sketch B if a properly grounded
outlet is not available. The temporary adapter should be used only
until a properly grounded outlet (sketch A) can be installed by a
qualified electrician. The green colored rigid ear, lug, and the like
extending from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover. Whenever
the adapter is used, it must be held in place by the screw.
11