RADWAG R Série Mode D'emploi page 67

On adding all samples, end adding procedure by following the steps:
In the bottom line message <RESULT> is displayed. It means that the total result of all measured
samples masses is displayed and the sum is automatically printed.
An exemplary printout:
You can print the sum once again. To do that, press
window. You return to <ADDING> mode home screen and the data on carried out measurements is
automatically zeroed.
You can print an intermediate sum of saved samples. In such case, follow the steps presented below.
1. Net 38.000g
Tare 0.000g
CAUTION: On adding process completion, only a summary is printed.
Masses of particular samples are printed on confirmation.
button. Press
- 67 -
button to exit the