RADWAG R Série Mode D'emploi page 31

Once the balance is switched on, the display stays active all the time, this enables carrying out mass
measurements even when no user is logged-in.
User parameters, databases and software functions may be edited depending on the access
level granted to a particular user. Access levels are presented in the table below.
Access
Permissions
levels
USER Access to parameters of the submenu <Reading>, permission to change settings for
parameter group <Other> except for <Date and Time>. Permission to start and carry
out all the weighing processes. You can preview information in <Databases> and
define universal variables.
ADV Access to editing parameters of the submenu: <Reading>; <Working modes>;
<Communication>; <Devices>; <Other> except for <Date and Time>. Permission to
start and carry out all the weighing processes.
ADMIN Access to all user parameters and functions, permission to edit databases.
In order to add a user, follow the scheme shown below, add a user and assign a name to him/her.
Once the user name is added, enter the following:
User code – Max 6 characters,
User password – Max 8 numbers.
Next select:
•
Access level (USER, ADV, ADMIN)
•
Language
In order to remove a user you should follow this procedure:
•
Enter the user database
•
Select the user that is to be removed from the list
•
Press button
•
The software shows <DELETE?> message in the bottom line
•
Confirm by pressing
•
When confirmed, the software removes the selected user from the list
button
- 31 -