RADWAG R Série Mode D'emploi page 29

%2
Variable 2
Variables depending on the currently used working mode
Variable Description
%W
Standard mass 1 pcs
%H
High threshold
%L
Low threshold
%A
Target mass
%B
Reference mass
Non-standard characters used in designing non-standard printouts
\\
a single „\" character
\C
CRLF
\R
CR
\N
LF
\T
Tabulator
\F
Form feed (for PCL printers)
%E
Crop the paper for EPSON printers
Every single printout can contain max 160 characters (letters, numerals, non-standard characters,
spaces). You can apply non-standard characters depending on type of data that is to be printed out.
Example 1:
"RADWAG"
DATE: <current measurement date>
TIME: <current measurement time>
PRODUCT MASS: <current mass indication>
*****SIGNATURE:.........
<current working mode>
Enter printout content settings and design the printout using respective data variables and characters
for text format.
Example 2:
To crop the paper after the printout had been carried out by EPSON printer (if the printer is equipped
with an autocutter blade) the user must select (for a given printout: HEADER, GLP PRINTOUT or
FOOTER) an option of non-standard printout 1,2,3 or 4 with <%E> value available and select this
printout for a given printout settings.
In such case <SUFFIX> command should stay empty.
Paper must be cropped underneath the FOOTER.
Example settings:
P5.4.14 STANDARD PRINTOUT | NSD. PRN. 1
P5.5 NSD. PRN. 1 | %E
Mode for which the variable is active
PARTS COUNTING
CHECKWEIGHING
DOSING
PERCENT WEIGHING
- 29 -