RADWAG R Série Mode D'emploi page 33

Procedure:
Each measurement is saved with its individual number. The format is: b4.4.n, where <n> is the
consecutive number of the saved measurement. In the bottom line the date and time are displayed
for every single measurement.
To swap between measurements recorded in database, use the arrow buttons,
Pressing one of these buttons lets the user move to the next measurement either up or down the list.
To view the remaining data relating to a respective measurement, first select the measurement in
question, next press
The software automatically shows the data relating to the measurement, data is presented in the
bottom line of the balance display.
To swap between data relating to the measurement, press
measurement can be printed out by selecting the option <PRINT> and pressing
An exemplary printout:
Date
Time
User
Product
Tare
Gross
0.000 g
-----------------Cal. report.---------------
Cal. Type
User
Project 1234567890123459
Date
Time
Balance ID
Cal. diff.
-----------------------------------------------
Signature
......................................................
button:
21.06.2013
13:05:02
0.000 g
0.000 g
Internal
16.07.2013
13:27:09
10353870
-0.004 g
or
- 33 -
or
. The data relating to the
button.
.