Outdoorchef DUALCHEF 315 G Mode D'emploi page 27

Masquer les pouces Voir aussi pour DUALCHEF 315 G:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
DIFFERENCE BETWEEN THE TEMPERATURE ZONES WITH OR WITHOUT THE DGS
WITH DGS
ZONE DIVIDER
®
You may e. g. prepare a delicious roast on the right barbecue side, using the DGS
and at the same time a pizza or seared steaks on the left side.
3. The DGS
ZONE DIVIDER also supports an optimised gas consumption. If you only want to grill a small amount of food, use the DGS
®
ZONE DIVIDER to separate the unused grill surface. Reducing the size of the DUALCHEF grill chamber increases the efficiency of the used
grill surface and the operated burner. See the illustrations below to understand how to separate the zones.
4. The DGS
ZONE DIVIDER enables direct grilling in one grilling zone and at the same time careful cooking in the other zone.
®
THE DGS
HEAT DIFFUSER
®
DGS
When preparing food with a rotisserie, the required heat is usually produced by a rear burner. The rear burner's rising heat and the roast posi-
tioned in front of it require a large amount of gas to achieve the desired result. At the same time, the temperature control is highly limited.
The DGS
HEAT DIFFUSER guides the required heat directly from the DGS
®
This arrangement enables a roast to be prepared with just one burner set to position 1. Combining the DGS
ZONE DIVIDER and the DGS
HEAT DIFFUSER reduces the gas consumption and increases the temperature range.
®
How to use the DGS
HEAT DIFFUSER:
®
1. Use the Grid Lifter to remove the barbecue grid from the right-hand side of the barbecue.
2. Place the DGS
HEAT DIFFUSER as shown above.
®
3. Place the food to be grilled in the OUTDOORCHEF DGS
4. Push the rotisserie into the motor block (part of the DGS
equipment.
5. Next, start the DUALCHEF and cook the roast with the desired temperature.
6. Use the Grid Lifter to remove the DGS® HEAT DIFFUSER again.
The DGS
PROTECTION BARS and the DGS
®
excessive fat is drained in controlled manner thanks to the specific shape of the DGS
The grilling zone design enables you to prepare more food to be grilled on the remaining free grilling zone.
WITHOUT DGS
ZONE DIVIDER
®
®
ROTISSERIE KIT (not included, optional accessories).
®
ROTISSERIE KIT). Next, place the opposite side on the DGS
®
HEAT DIFFUSER protect the DGS
®
27
OUTDOORCHEF.COM
ZONE DIVIDER
®
HEAT DIFFUSER (see chapter DGS
®
TWIN BURNER to the food to be grilled in the rotisserie.
TWIN BURNER with the DGS
®
TWIN BURNER from dripping fat and prevent flare-up. The
®
HEAT DIFFUSER between the DGS
®
HEAT DIFFUSER)
®
®
®
ZONE DIVIDER
®
TWIN BURNERS.
®

Publicité

Table des Matières
loading

Table des Matières