Overview; Product Conformity; Residual Risk Warnings - DEA SYSTEM ANGOLO 24/1 Notice D'emploi

Operating instructions and warnings
ANGOLO
Gate operator for swing gates
Operating instructions and warnings
INDEX
Declaration of Conformity ...............................1
OVERVIEW .....................................................10
1 PRODUCT CONFORMITY ................................10
2 RESIDUAL RISK WARNINGS ..........................10
3 MODELS AND CONTENTS OF THE PACKAGE 11
4 OPERATING INSTRUCTIONS .........................11
4.1 Product description ..............................11
4.2 Technical data ......................................11
4.3 Labelling information ..........................11
4.4 Appropriate conditions of use .............11
4.5 Instructions for risk-free operation .....12
4.5.1 Transport
4.5.2 Installation, assembly
and disassembly
4.5.3 Starting
4.5.4 Use
4.5.5 Adjustment
4.5.6 Maintenance and repair
4.6 Training ...............................................13
4.7 Inappropriate use ................................13
5 WIRING AND CONTROL BOARD PROGRAM-
MING ...........................................................13
5.1 Wiring and terminal board connecti ...13
5.2 Programming ......................................14
6 SPARE PARTS LIST ..........................................15
7 COMPLETE CLOSING ASSEMBLY ....................15
7.1 Minimum level of protection
provided by the safety edge ................15
7.2 Risk of crushing in the opening area ..15
7.3 Impact in the opening/closing area ....16
Example of typical installation ............42
ENCLOSURES
- Instructions for the final user
- Terms of warranty

OVERVIEW

SCOPE OF THE INSTRUCTIONS
These instructions were prepared by the manufacturer and
are an integral part of the product. The operations described
are intended for adequately trained and qualified operators and
10
must be carefully read and preserved for future reference.
Chapters "2 RESIDUAL RISK WARNINGS" and "4 OPERA-
TING INSTRUCTIONS" contain all the information that DEA
System provides so that the product may constantly satisfy the
Essential Safety Requirements prescribed by the Machinery Di-
rective (European Directive 2006/42/CE).
Read these chapters carefully because they contain impor-
tant instructions for safe installation, use and maintenance and
important warnings regarding the residual risks remaining even
after all the safety devices and measures described have been
applied.
The product is designed for installation in complete closing
systems subject to specific legislation. Chapter 7 "COMPLETE
CLOSING ASSEMBLY" provides useful information for the re-
spect of the Essential Safety Requirements for special types of
closing.
A N G O L O

1 PRODUCT CONFORMITY

ANGOLO gate operator bears the CE label. DEA System
guarantees the conformity of the product to European Direc-
tives 2006/42/CE regarding machinery safety, 2004/108/CE
(electromagnetic compatibility) and 2006/95/CE (low voltage
electrical equipment). See Declaration of Conformity.

2 RESIDUAL RISK WARNINGS

12
Read these warnings carefully; failure to respect the fol-
12
lowing warnings may cause risk situations.
12
WARNING Using this product under unusual conditions not
12
foreseen by the manufacturer can create situations of danger,
12
and for this reason all the conditions prescribed in these in-
12
structions must be respected.
WARNING DEA System reminds all users that the selection,
positioning and installation of all materials and devices which
make up the complete automation system, must comply with
the European Directives 2006/42/CE (Machinery Directive),
2004/108/CE (electromagnetic compatibility), 2006/95/CE
(low voltage electrical equipment). In order to ensure a suita-
ble level of safety, besides complying with local regulations, it
is advisable to comply also with the above mentioned Directi-
ves in all extra European countries.
WARNING Under no circumstances must the product be
used in explosive atmospheres or surroundings that may prove
corrosive and damage parts of the product.
WARNING All installation, maintenance, cleaning or repair
operations on any part of the system must be performed exclu-
sively by qualified personnel with the power supply discon-
nected working in strict compliance with the electrical standar-
ds and regulations in force in the nation of installation.
WARNING Using spare parts not indicated by DEA System
and/or incorrect re-assembly can create risk to people, ani-
mals and property and also damage the product. For this
reason, always use only the parts indicated by DEA System
and scrupulously follow all assembly instructions.
WARNING Awareness of the operation of the key-release
mechanism (see F9 Page 48) is essential for all users of the
automatism because failure to use the device quickly during
emergencies can jeopardize people, animals and property.
Enclosure I to these instructions, which the installer is required
to deliver to the final user, illustrates operation and can be
detached.
WARNING To ensure an appropriate level of electrical safety
always keep the 230V power supply cables apart (minimum
4mm in the open or 1 mm through insulation) from low volta-
ge cables (motors power supply, controls, electric locks, aerial
and auxiliary circuits power supply), and fasten the latter with
appropriate clamps near the terminal boards.
ENGLISH