Storage; Troubleshooting - Hoover Eenhanced Clean Manuel Du Propriétaire

4

storage

„
Unplug the power cord and disconnect the power supply.
„
Place steamer in cooling base and allow to cool.
„
Empty the residual water in the tank and clean the external surface with a dry cloth. Allow to dry.
„
Re-install water tank, replace in cooling base to prevent damage to floor and store in upright position.
„
Leaving unused solution in solution tank will not affect performance.
5

troubleshooting

USE TROUBLESHOOTING GUIDE AS A FIRST STEP TO RESOLVE ANY PROBLEMS YOU MAY BE
EXPERIENCING.
All servicing should be done by an authorized service representative.
To reduce risk of personal injury - unplug Steam Mop before servicing and allow to cool.
ProbLeM PoSSibLe cauSe
Steam Mop 1. Unit may not be plugged into the
electrical outlet correctly.
won't run
2. The electrical outlet may not be
working properly, check the fuse or
breaker, or consult an electrician.
3. The power cord may be damaged.
Steam mop 1.Clean water tank may be empty.
not producing
steam
2. The water tank may not be attached
correctly.
3. Water filter may be clogged and
needs to be replaced.
4. Thermal protector may turn off pump
if trying to operate unit before steam
indicator is illuminated.
5. Steam path may be blocked.
Microfiber pad 1. The cleaning pad may already be
saturated with dirt and needs washing.
doesn't pick
up dirt
WARNING
!
12
!
PoSSibLe SoLution
1. Ensure the plug is pushed in securely.
2. Check fuse or breaker in home. Replace
fuse/reset breaker in home.
3. If cord is damaged have it replaced by
an authorized service representative.
1. Please refer to the "Filling Clean Water
Tank" section - page 7.
2. Please refer to the "Filling Clean Water
Tank" section - page 7.
3. Check water filter and clean or replace.
4. Unplug unit and allow to cool down
5. Please refer to the "Clearing Blockages"
section - page 13.
1. Clean or replace with clean pad. Please
refer to the "Microfiber Pad" section.