Cord Storage; Before You Begin Cleaning - Hoover POWERDASH GO Guide D'utilisation

Masquer les pouces Voir aussi pour POWERDASH GO:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cord storage

Wrap cord around the cord hooks for convenient
storage. Attach the plug end to the cord.
For fast cord release, simply turn upper cord wrap
downward.

Before You Begin Cleaning

Don't use the carpet cleaner as a dry
vacuum cleaner.
Use your HOOVER
portable carpet
®
cleaner only if upholstery fabric is
marked with a "W" (for "wet" clean)
or "S/W" (for "solvent/dry" or "wet"
clean). Don't clean fabric marked "S"
("solvent/dry" clean only).
Test for colorfastness in a small,
hidden area. Gently rub surface with
a dampened white cloth. Wait ten
minutes and check for color removal
or bleed with a white paper towel.
Move furniture out of area to be
cleaned. Place aluminum foil or
wax paper under legs of furniture
too heavy to move to prevent wood
finishes from staining carpet. Pin up
furniture skirts and draperies.
ATTENTION:
Some Berber,
Natural Fiber, and Soft Fiber
carpets can fuzz with wear. Some
vacuums & carpet cleaners can
worsen this carpet wear. Test a
hidden area before using on a
full room & consult with your
carpet manufacturer on cleaning
recommendations.
NOTE: To prevent staining, use
plastic or aluminum foil to
protect wood or metal surfaces
from possible water spray.
NOTE: To avoid damage to wood
floors underneath area rugs or
carpet, place waterproof material
(e.g. plastic underneath them
before cleaning.
7

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Fh13010

Table des Matières