Thermal Protection; Need Help; Lubrication - Hoover POWERDASH GO Guide D'utilisation

Thermal Protection

A thermal protector has been designed into your cleaner to protect it from
overheating. When the thermal protector activates the cleaner will stop
running.
If this happens proceed as follows:
1. Turn cleaner OFF and unplug it from the electrical outlet.
2. Empty dirty water tank.
3. Inspect for any obstructions. Clear obstructions if present.
4. When cleaner is unplugged and motor cools for 30 minutes,
the thermal protector will deactivate and cleaning may continue.
If the thermal protector continues to activate after following the above steps,
your cleaner needs servicing.
CORD STORAGE
Wrap the power cord around the cord hooks for convenient storage.
Attach the plug end to the cord.

LUBRICATION

The motor is equipped with bearings which contain sufficient lubrication for
their lifetime.
The addition of lubricant could cause damage. Do not add lubricant to motor
bearings.

Need Help?

If you need further assistance:
If your product needs servicing within the warranty period, please contact Customer
Service at 1-800-944-9200; Mon-Fri 7am-6pm EST. Always identify your carpet
washer by the complete model number when requesting information or ordering
parts. (The model number of the carpet washer is located on the data plate).
PLEASE DO NOT RETURN THIS CLEANER TO THE STORE.
QUESTIONS OR CONCERNS?
Contact Us: 1-800-944-9200
If you have any questions or, visit Hoover.com or connect with us:
Twitter: @HooverUSA
Facebook: facebook.com/hoover
Do not return to store. See back of product for model number.
11