Grounding Instructions - Hoover POWERDASH GO Guide D'utilisation

CAUTION:
TO REDUCE THE RISK OF DAMAGE:
• Avoid picking up hard, sharp objects with this product, as they may cause damage.
• Store appropriately indoors in a dry place. Do not expose machine to freezing
temperatures.
• Do not use sharp objects to clean out hose as they can cause damage.
• To assist in reducing drying time, be certain the area is well ventilated when using
detergents and other cleaners with this machine.
• To help prevent matting and resoiling, avoid contact with carpets until they are dry.
Keep children and pets away from carpets until they are completely dry.
• Do not store extractor with solution in tanks.
• DO NOT USE THIS EXTRACTOR ON HARD FLOORS UNLESS YOU HAVE THE PROPER HARD
FLOOR ATTACHMENT. USING THIS PRODUCT ON HARD FLOORS MAY SCRATCH OR DAMAGE
YOUR FLOOR.
• Water will drip from the tool after use and may puddle. To avoid damage to wood and
laminate flooring and to avoid potential slip hazard, after use (a) do not leave the
product on wood and laminate surfaces and remove to a hard surface and (b) place unit
on absorbent material (such as a towel) to soak up drips.
1
A
C

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric
shock. This appliance is equipped with a cord having an equipment-grounding conductor
(C) and grounding plug (A). The plug must be inserted into an appropriate outlet (B) that
is properly installed and grounded in accordance with all local codes and ordinances.
WARNING:
Improper connection of the equipment-grounding conductor can
result in the risk of electric shock. Check with a qualified electrician or service person
if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug
provided with the appliance - if it will not fit the outlet, have a proper outlet installed by
a qualified electrician. This appliance is for use on a nominal 120-volt circuit and has
a grounding plug that looks like the plug (A) illustrated in Fig. 1. A temporary adapter
(D) may be used to connect this plug to a 2-pole receptacle (E) if a properly grounded
outlet is not available (Fig. 2). The temporary adapter should be used only until a
properly grounded outlet (B) can be installed by a qualified electrician (Fig. 1). The green
colored rigid ear, lug, or the like (F) extending from the adapter must be connected to a
permanent ground (G) such as a properly grounded outlet box cover (Fig. 2). Whenever
the adapter is used, it must be held in place by a metal screw. NOTE: In Canada, the use
of a temporary adapter is not permitted by the Canadian Electrical Code.
2
D
B
E
F
:
D
G
5