How To Use; Vacuum Description; On-Off Switch; Suction Only Mode - Hoover WINDTUNNEL T Serie Mode D'emploi

vacuuM description

1. Handle**
2. ON/OFF Switch
3. Dirt Cup Release Button
4. Carry Handle
5. Dirt Cup
6. Stair Cleaning Handle
7. Headlight*
8. Height Adjustment
9. Furniture Guard
10. Brushroll On/Off Pedal*

(Suction Only Mode)

11. Cord Rewind Pedal*
12. Filter made with HEPA media
and Carbon Filter* Access
13. Rinsable Filter Access
14. System Check Indicator
15. Powered Hand Tool**
16. Crevice Tool
17. Wand
18. Hose
19. Handle Release Pedal
20. Hose Tube
21. Hose Release Button
22. Dusting/ Upholstery Tool**
23. Folding Handle Release*

on-off switch

2.2

cord rewind and storaGe

(Available on select models only)
2.4
IMPORTANT
identify when the cord is almost fully extended. When
red tape is visible on the cord, the cord has reached
its allowable extended length. Do not pull the cord out
any further.
Actual model may vary from images shown.

2. how to use

2.1
*Available on select models only
**Varies per model
2.2 Plug cord into elec-
trical outlet.
To turn vacuum ON,
push ON/OFF switch
once.
To turn vacuum OFF,
push switch again.
2.4 Grasp the end of the
plug and pull to release
cord from cord reel until
red tape is reached.
To return cord for storage,
hold plug and press
down Cord
A
Pedal (A) on side of cord
reel. Hold plug when
rewinding onto cord reel.
Do not allow plug to
whip when rewinding.
When pulling on the
cord, yellow tape will
1
2
3
4
5
6
7
8
9
suction onlY Mode
for bare floors and tool use.
(Available on select models only)
2.3

foldinG handle

(Available on select models only)
2.5
Release
A
6
15
14
13
16
17
18
12
11
10
19
2.3 For optimal clean-
ing performance on
A
bare floors, brushroll
should be turned off.
The vacuum is shipped
with the brushroll in the
ON position. To turn
brushroll
Suction Only Mode,
step on pedal (A).
for storage.
2.5
Release (A) to fold the
handle to storage posi-
tion.
23
22
21
20
OFF for
Press Handle