Maintenance; Clean Water Tank; Microfiber Pad; Hard Water Filter - Hoover Eenhanced Clean Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3

Maintenance

Familiarize yourself with these home maintenance tasks as proper use and care of your Steam Mop will
ensure continued cleaning effectiveness.
All servicing should be done by an authorized service representative.

Clean water tank

IMPORTANT
Allow the steamer to fully cool down before
performing any maintenance or troubleshooting
checks.
How to empty
Remove the clean water tank located on the
front side of Steam Mop (3.1).
Twist the cap counter-clockwise to remove (3.2).
Empty any excess water into the sink, allow to air
dry and replace water cap and return to the
Steam Mop (3.3).

MiCroFiber Pad

IMPORTANT
Allow the Steam Mop to fully cool down before
performing any maintenance or trouble-
shooting checks.
How to remove
Step on exposed
tab
located
back of microfiber
pad
(3.4).
Lift
Steam Mop away
from
microfiber
pad to remove.

hard water Filter

When to replace
The condition of the filter affects the performance of your machine.
Check and change filter (depending on level of use).
Do not operate Steam Mop without hard water filter in place.
To locate hard water filter, remove clean water tank on FRONT of
Your machine is fitted with a hard water filter. If you live in an area of
over time. Depending on water hardness and/or frequency of use the filter should be changed every 12
months (3.5). Contact a HOOVER
details: Part #440001633.
3.4
on
IMPORTANT
®
customer service representative at 1-800-944-9200 for replacement
3.1
3.3
How to clean
IMPORTANT
Never use bleach or fabric softener when
washing the pad.
Machine washable on "HOT" setting.
Always use a detergent.
For best care results, lay flat to dry.
Steam Mop.
hard water the filter will discolor/darken
11
3.2
3.5

Publicité

Table des Matières

Dépannage

loading

Table des Matières