Remove the front panel by loosening the two attachment pins and lifting the
panel upwards, off the 2 upper attachment points. Remove the filter and the
honeycomb filter from the unit.
Wash the filter in warm water with a mild, soapy solution; use a soft brush if
necessary. Rinse with clean water and leave to dry.
Wash the honeycomb filter with clean water and a soft brush if necessary. Leave
to dry.
Empty the water tank and clean with water, a mild soapy solution and a soft
brush if necessary. Rinse with clean water and leave to dry.
1 = front panel 2 = filter
At the end of the season, store the cleaned and dried heater in the original
packaging if possible. Store it upright in a cool, dry and dust-free place.
Never let water sit in the water tank or casing for longer than a few days.
Change it/throw it away; rinse the tank and let the aircooler dry if you are
Problems and solutions
The device does not work
No electricity. Check to ensure the plug is in the socket and that the socket is
live.
Is the ON/OFF button pressed in?
An internal electrical component is broken. Consult your supplier or an
electrician.
The unit will not switch off
Is the ON/OFF button pressed in?
3 = honeycomb-filter
not planning to use it for a while.
29