Image Horizontal Flip [Mirror]; Lens Type Setting [Lens-Drive] - Panasonic WV-CLR930 Mode D'emploi

Step 4
Move the cursor to "POSITION" and press the setting button.
Step 5
Use the up, down, right, and left buttons to decide the zone position and press the setting but-
ton.
→ The zone position is determined.
Step 6
Move the cursor to "SCALE" and use the up, down, right and left buttons to adjust the zone
frame size. The up and down buttons decide the vertical size, and the right and left buttons
decide the horizontal size. Press the setting button after the zone frame size setting.
Step 7
Move the cursor to "SET" and press the setting button.
→ The zone is determined and the zone number selection screen appears again.

13. Image horizontal flip [MIRROR]

"ON" or "OFF" is selected to decide whether or not to flip images horizontally. Image horizontal
flip is selected in accordance with the camera location (usage environment).
ON: Flips camera images horizontally.
OFF (default): Does not flip camera images horizontally.

14. Lens type setting [LENS-DRIVE]

The drive control type is selected in accordance with the lens to be used.
DC (default): Is selected to use an auto iris lens with DC control type.
VIDEO: Is selected to use an auto iris lens with video signal type.
46