I Basic Operation - Panasonic WV-CLR930 Mode D'emploi

I Basic operation

The description below explains how to operate the setup menu basically.
The operations in the setup menu are performed with the operation buttons ( pages 9 - 10)
after calling up the setup menu on the connected video monitor.
The operations in the setup menu can also be performed through the system controller (option).
Screenshot 1
Hold down the setting button for approx. 2
seconds to call up the top screen of the
setup menu.
MODEL
O
CAMERA
BACK-FOCUS
SPECIAL
COMMUNICATION
LANGUAGE
END
Screenshot 2
The setup mode changes to "ENABLE", and
the setup menu becomes ready to be set.
MODEL
O
CAMERA
BACK-FOCUS
SPECIAL
COMMUNICATION
LANGUAGE
END
24
WV-CLR930 SRS
O
O
O
O
SETUP DISABLE
WV-CLR930 SRS
O
O
O
O
SETUP ENABLE
Step 1
Press the up button or the down button to
move the cursor to "END".
Step 2
Press the right button to move the cursor to
"SETUP", and press the setting button to
change the setup mode from "DISABLE" to
"ENABLE".
Step 3
Move the cursor to the item to be set, and
press the setting button.