Gain Control Setting [Agc] - Panasonic WV-CLR930 Mode D'emploi

4. Gain control setting [AGC]

"CAMERA SETUP" screen
**CAMERA SETUP** 1/2
CAMERA ID
ALC/ELC
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
DNR
RESOLUTION
BW MODE
"AGC MAX" screen
** AGC MAX **
LEVEL
RET TOP END
32
OFF O
O
ALC
OFF
ON O
OFF
INT
ATW1 O
OFF
HIGH
HIGH
O
···I··· 128
- +
Step 1
Move the cursor to "AGC" and use right or left
button to select "ON" or "OFF".
ON (default): Automatically increases the
gain to make the screen brighter when
the illuminance of the subject becomes
darker. The maximum value is adjust-
able.
OFF: Does not increase the gain. (The nor-
mal image remains.)
Step 2
Move the cursor to "ON" and press the set-
ting button to call up the "AGC MAX" screen.
Step 3
Move the cursor to "LEVEL". The cursor is
reversely highlighted.
Move the cursor horizontally to adjust the
gain with use of the right or left button.
Notes:
• Change in the level of "AGC MAX" caus-
es change in the level of the input signal
that enables
enhancement when "SENS UP" is set to
AUTO and also change in the level of the
input signal that activates black-and-
white mode.
• If noise is undesirable, adjust the level of
"AGC MAX".
electronic sensitivity