Panasonic WV-CLR930 Mode D'emploi page 14

v
Establish the connection of a coaxial cable (locally procured).
Important:
• Be sure to turn off the power of each device before connection.
• Be sure to secure the coaxial cable connectors.
Connect a coaxial cable (locally procured) to the video output connector. If the synchroniz-
ing signal input is provided from an external device, connect another coaxial cable to the
external synchronization input connector.
220V-240V ~ 50Hz
b
Use a cable tie (locally procured) to attach the coaxial cable to the camera mount
bracket.
Important:
• The cable tie shall be made of metallic or durable material to be strong enough because
the tie plays the role of camera drop prevention measures in case.
Important:
• When installing the camera mount bracket on wall, installation height of the camera mount
bracket shall be as indicated in the illustration.
14
GEN-LOCK VIDEO OUT
IN/OUTPUT
TERMINAL
POWER
1
2
3
4
6
5
7
8
9
(This illustration represents WV-CLR930.)
<Installation sample on a wall>
Camera mount bracket
(option)
From external synchronization source
(VBS/VS)
Coaxial cables (locally procured)
To video input (CAMERA IN)
The cable shall be tied to
the camera mounting
base.
More than 270 cm
Floor