Sensors; Performance Approvals; Eu-Type Examination Certificate, Tüv 19 Atex; Type Examination Certificate, 968/Fsp - Dräger Polytron 5000 Série Mode D'emploi

en

Performance Approvals

Description
Calibration Adapter PIR 7000 6811610
Process adapter PIR 7000 /
7200 POM (Polyoxymethy-
lene)

18.5.1 Sensors

Check firmware compatibility of sensor and transmitter.
Changing the sensor may require a firmware update. For
support, contact Dräger.
Description
Dräger PIR 7000 Type 334
(NPT)
Dräger PIR 7000 Type 340
(NPT)
Dräger PIR 7000 334 (M25)
complete set
Dräger PIR 7000 340 (M25)
complete set
Dräger PIR 7200 (NPT)
Dräger PIR 7200 (M25)
HART, complete set
19 Performance Approvals
In combination with certain sensors, Polytron
performance approved by EU- and Type Examination
Certificates in line with EN 60079-29-1 and EN 45544.
For further information on sensor specifications and
restrictions (e. g. measuring principles, performance, cross-
sensitivities), refer to the Instructions for Use and/ or data
sheets for the sensors.
19.1 EU-Type Examination Certificate,
TÜV 19 ATEX 8435 X
Measurement of flammable gases and vapours mixed with air.
®
– Polytron 5200 CAT with DrägerSensor DQ
®
– Polytron 5310 IR with DrägerSensor IR
®
– Polytron 5700 IR with PIR 7000 type 334 and 340
Approved are:
– 4-20mA interface
– Relay module
– Remote sensor
19.2 Type Examination Certificate,
968/FSP 1935.00/19
Measurement of carbon dioxide
®
– Polytron 5720 IR with PIR 7200
Part Number
6811915 / 6811415
Part number
6811822
6811832
6811825
6811819
6811572
6812290
®
5xx0 is
Approved are:
– 4-20mA interface
– Relay module
– Remote sensor
®
Dräger Polytron 5000 Series