Ryobi RBC430SESC Manuel D'utilisation page 21

Switch
10
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
English(Original instructions) English
SYMBOLS
On/Off Switch
I
O = OFF to Stop
Conforms to all regulatory standards in the country in the EU
where the product is purchased.
Run position.
Full Choke position.
Half Choke position
Place the engine switch to the "I" position
PRIME - press the primer bulb 10 times slowly
Pull the starter rope until the engine attempts to start
Lock - lock the throttle in position by depressing the throttle
interlock button.
Squeeze throttle trigger to start/run.
Wait 10 seconds.
GOST-R conformity
SIGNAL
Indicates an imminently hazardous situation, which, if not
DANGER:
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
WARNING:
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
CAUTION:
may result in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may
CAUTION:
result in property damage.
= On to Run
MEANING
19