Sony DSX-A416BT Mode D'emploi page 29

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 76
For BLUETOOTH function:
BTA NO DEV: The BLUETOOTH device is not
connected or recognized.
 Make sure the BLUETOOTH device is
securely connected, or the BLUETOOTH
connection is established with the
BLUETOOTH device.
ERROR: The selected operation could not be
performed.
 Wait for a while, then try again.
UNKNOWN: A name or phone number
cannot be displayed.
WITHHELD: The phone number is hidden by
the caller.
For Sony | Music Center operation:
APP ––––––––: A connection with the
application is not established.
 Make the "Sony | Music Center"
connection again (page 16).
APP DISCNCT: The application is
disconnected.
 Make the "Sony | Music Center"
connection (page 16).
APP DISPLAY: A screen setting display of
the application is open.
 Exit the screen setting display of the
application to enable button operation.
APP LIST: The contents list of the USB is
open.
 Exit the list of the application to enable
button operation.
APP MENU: A setting display of the
application is open.
 Exit the setting display of the application
to enable button operation.
APP NO DEV: The device with the
application installed is not connected or
recognized.
 Make the BLUETOOTH connection and
establish the "Sony | Music Center"
connection again (page 16).
APP SOUND: A sound setting display of the
application is open.
 Exit the sound setting display of the
application to enable button operation.
OPEN APP: The "Sony | Music Center"
application is not running.
 Launch the application.
For steering wheel remote control
operation:
ERROR
 Register again from the function where
the error occurred (page 19).
TIMEOUT
 Try completing the registration while
[REGISTER] is blinking (about 6 seconds)
(page 19).
For firmware update operation:
FILE ERROR: The updater is not stored in the
USB device.
 Store the updater in the USB device, then
try again (page 22).
UPDATE ERROR PRESS ENTER: Firmware
update is not completed properly.
 Press ENTER to clear the message, then try
again.
 During the update, do not turn the
ignition to the OFF position, nor remove
the USB device (page 22).
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of
device playback trouble, bring the device
that was used at the time the problem
began.
29
GB

Publicité

Table des Matières
loading

Table des Matières