Honda EU65is Mode D'emploi page 354

cap.10 EU65is 6500is 07.12.17 4:56 PM ページ10-4
3. UNDER SHROUD
a. REMOVAL/INSTALLATION
Remove the engine/generator assembly from the frame.
6 x 12 (2)
See the pages listed below for other engine shroud removal/
installation:
– Head cover shroud (P. 4-4)
– Upper shroud (P. 11-1)
– Right side shroud (P. 11-1)
– Lower shroud (P. 13-1)
– Engine shroud (P. 13-1)
The engine shrouds listed above can be removed and installed
with the engine in the frame.
Install the shrouds in the numbered sequence shown when the
engine is removed from the frame and install the shrouds
before installing the engine.
10-4
6 x 30 (2)
[5]
ENGINE SHROUD
[4]
LOWER SHROUD
[1]
OIL DRAIN GUIDE
[2]
UNDER SHROUD
[2]
[1]
RIGHT SIDE
UPPER SHROUD
SHROUD
[3]
UNDER SHROUD