Honda EU65is Mode D'emploi page 334

cap.08 EU65is 6500is 07.12.17 4:54 PM ページ8-2
2. MUFFLER
The muffler becomes very hot during operation and
remains hot for a while after stopping the engine. Be
careful not to touch the muffler while it is hot. Allow it to
cool before proceeding.
[1]
8 mm FLANGE NUT (4)
24 N . m (2.4 kgf . m, 18 lbf . ft)
[9]
5 x 16 mm PAN-HEAD SCREW (2)
3.5 N . m (0.4 kgf . m, 2.6 lbf . ft)
8-2
[4]
EXHAUST PIPE
INSTALLATION:
Remove any carbon deposits.
[3]
MUFFLER COLLAR (2)
[2]
EXHAUST PIPE
GASKET A
Do not reuse.
[8]
EXHAUST TAIL PIPE
INSTALLATION:
Remove any carbon deposits.
[5]
EXHAUST PIPE
GASKET B
Do not reuse.
8 x 20 (2)
27 N . m (2.8 kgf . m, 20 lbf . ft)
[6]
MUFFLER
INSTALLATION:
Remove any carbon deposits in the
muffler by lightly tapping around it
with plastic hammer.
[7]
SPARK ARRESTER
CLEANING: P. 3-6