Parameters - Honeywell 301C Manuel De L'utilisateur

Parameters

The "parameters" function allows one transmitter's configuration to be
copied to another or one event's parameters to be copied to another
event. This allows several devices that share identical or similar
parameters to be quickly configured.
The options within this screen are:
Tx Info to Tx Info copies transmitter parameters from one device to
another.
Event to Event copies parameters from Event to Event.
The process is identical for both options:
•
Select source, (the data to be copied) using the up/down keypad
arrows and press Enter.
•
When the transmitter address is flashing, use the up/down keypad
buttons to search for the desired device address.
•
Press Enter to select the new address
•
Select the target address (where the data is to be copied to) in
exactly the same way as source
•
Select COPY and press Enter. The parameters have been copied.
50