Objets De Base - Honeywell 301C Manuel De L'utilisateur

Objets de base

Group Property
object_identifier
object_type
event_state
object_name
out_of_service
polarity
present_value
priority_array
reliability
relinquish_default
active_text
inactive_text
status_flags
in_alarm
fault
overridden
out_of_service boolean
object_identifier
object_type
event_state
object_name
out_of_service
polarity
present_value
priority_array
reliability
relinquish_default
status_flags
in_alarm
fault
overridden
out_of_service boolean
Notes
1 -- 'R' indicates that this property is required by ASHRAE Standard 135
'O' indicates that the property is optional in ASHRAE Standard 135
2 -- 'C' indicates the property is hard-coded as a constant
'N' indicates the property is stored in non-volatile memory
'R' indicate the property is computed constantly and stored in RAM.
Storage
Data Type 1 Type
Required
R
enumerated R
enumerated R
character string R
boolean R
enumerated R
enumerated R
R
enumerated 0
R
character string O
character string O
boolean R
boolean R
boolean R
R
R
enumerated R
enumerated R
character string R
boolean R
enumerated R
enumerated R
R
enumerated 0
R
boolean R
boolean R
boolean R
R
BACnet
2
Writeable?
46344 (or 0xB508) for Relay #1 up to
C N 46347 (or 0xB50B) for Relay #4
C N binary_output (4)
C N normal (0)
"device_object_name .relX", where
device_object_name is programmed on the
LUI and defaults to "VA301C:1" and X is
N N
relay number (1 to 4). Thus the default
object_name for Relay #4 will be
"VA301C:1.rel4"
C N FALSE
C N always Normal (0)
True state of the relays. These take the
Only
value of the highest-priority BACnet
R Rly1&2. Not
command. If no BACnet command, this
Rly 3or4.
takes the value of the associated event.
R N last value written
C N no_fault_detected (0)
C N not meaningful
C N "ON"
C N "OFF"
C N always "false" (0)
C N always "false" (0)
R N always "false" (0)
R N always "false" (0)
C N 46360 (or 0xB518)
C N binary_output (4)
C N normal (0)
"device_object_name .buzz", where
device_object_name is programmed on the
N N LUI and defaults to "VA301C:1" . Thus the
default object_name will be
"VA301C:1.buzz"
C N FALSE
C N always Normal (0)
True state of the buzzer. This takes the
value of the highest-priority BACnet
R Y
command. If no BACnet command, this
takes the value of the associated event.
R N last value written
C N no_fault_detected (0)
C N not meaningful
C N always "false" (0)
C N always "false" (0)
C N always "false" (0)
C N always "false" (0)
185
Value