Change Tx Address - Honeywell 301C Manuel De L'utilisateur

Change Tx Address

Selecting Change Tx Address allows users to move a device from one
TX address to another:
•
Use the arrows to scroll to Change Tx Address and press Enter to
select
•
In the next screen, scroll to the address number and press Enter to
select
•
Use the up or down arrows to increase or decrease the address
value and press Enter to validate the new address.
The Change Tx address option is only available (active) for device
address 1 to 96 and if there is a Modbus device connected.
If the address is valid, the screen will display "Processing". If the
address is invalid, the screen will display "Invalid Tx" and return to the
Change Tx Address screen (the address for GasPoint devices cannot
be changed). A final screen will display either "Error" or "Success" (re-
start procedure if Error is displayed).
Note: If a device address is changed to one already associated with
another device, the existing data will be overwritten. Customers
should know their network's address assignments and be careful
when changing a Tx address. Delete the original Tx address to
avoid duplicate entries.This feature is not supported with XNX
and XCD transmitters.
33