Stop Functions; Transport And Handling - Gemm NEW RUNNER Série Mode D'emploi

3.4 – STOP FUNCTIONS
The entire appliance is controlled by an electronic circuit board. The entire appliance is controlled by an electronic circuit board. The entire appliance is controlled by an electronic circuit board.
Whatever condition the machine is in, holding down the Whatever condition the machine is in, holding down the
1
4 – TRANSPORT AND HANDLING
4.1 – TRANSPORT
The packing used is suitable for the type, dimensions and weight of the appliance and ensures that it is protected and remain The packing used is suitable for the type, dimensions and weight of the appliance and ensures that it is protected and remains The packing used is suitable for the type, dimensions and weight of the appliance and ensures that it is protected and remain
undamaged during transport and delivery to the purchaser. during transport and delivery to the purchaser.
The blast chiller must be placed in position and kept upright on a pallet and surrounded by its packing box throughout its journey. The blast chiller must be placed in position and kept upright on a pallet and surrounded by its packing box throughout its jo The blast chiller must be placed in position and kept upright on a pallet and surrounded by its packing box throughout its jo
The blast chiller is handed over to the carrier ready to be handled. The blast chiller is handed over to the carrier ready to be handled.
The appliance must never be overturned. The appliance must never be overturned.
The packing must be well placed on the platform of the means of transport and secured by appropriate The packing must be well placed on the platform of the means of transport and secured by appropriate The packing must be well placed on the platform of the means of transport and secured by appropriate
ropes.
Take the utmost care when lifting and positioning the blast chiller, so as to avoid serious damage to persons Take the utmost care when lifting and positioning the blast chiller
or things. The manufacturer declines all responsibility if the indications for lifting and transport the blast or things. The manufacturer declines all responsibility if the indications for lifting and transport the blast or things. The manufacturer declines all responsibility if the indications for lifting and transport the blast
chiller are not observed.
Ambient temperature must never drop below 4° C durin g transport. Ambient temperature must never drop below 4° C durin g transport.
Once the blast chiller has been unpacked, the packing material must be eliminated and/or re he blast chiller has been unpacked, the packing material must be eliminated and/or re-used in compliance with current waste
disposal regulations in the countries where the appliance will be used. disposal regulations in the countries where the appliance will be used.
4.2. – HANDLING THE PACKED BLAST CHILLER HANDLING THE PACKED BLAST CHILLER
Take great care when lifting and handling the blast chiller; there is an injury hazard in handling loads, which Take great care when lifting and handling the blast chiller; there is an injury hazard in handling loads, which Take great care when lifting and handling the blast chiller; there is an injury hazard in handling loads, which
may also be fatal.
BCB_03-05-10-15 Rev.02
The stop function is represented by the The stop function is represented by the The stop function is represented by the
button for 3 seconds cuts out the circuit board. button for 3 seconds cuts out the circuit board.
, so as to avoid serious damage to persons
button (ref. 1 fig. 6).
used in compliance with current waste
Fig. 6
pag. 55