Bobbin Winding; Setting The Spool; Additional Spool Pin; Removing The Bobbin - Janome 49018 Manuel D'instructions

Bobbin Winding

• Setting the spool

Place a spool of thread on the spool pin with the thread
coming off the back of spool as illustrated.
A: Press the large spool holder q firmly against the spool
of thread.
q Large spool holder
B: For a small spool, use the small spool holder w.
w Small spool holder

• Additional spool pin

The additional spool pin w is for winding bobbins, without
unthreading the machine.
Set the spool stand q under the additional spool pin w.
Insert the additional spool pin w into the hole e.
Place the felt r and a spool on the pin.
q Spool stand
w Additional spool pin
e Hole for additional spool pin
r Spool pin felt

• Removing the bobbin

z Push the hook cover plate release button q to the right
and remove the hook cover plate w.
q Hook cover plate release button
w Hook cover plate
x Lift out the bobbin.
e Bobbin
(A)
q
(B)
w
e
z
x
24
r
w
q
q
w
e