To Adjust Buttonhole Stitch; To Adjust The Stitch Width; To Adjust The Stitch Density; Round-End Buttonhole - Janome 49018 Manuel D'instructions

To Adjust Buttonhole Stitch

• To adjust the stitch width

Press the cursor buttons
the stitch width value "5.0" q (default setting).
button to decrease buttonhole width w.
Press the
button to increase buttonhole width e.
Press the
The stitch width can be varied from 2.5 to 7.0 depending
on the selected buttonhole.

• To adjust the stitch density

Press the cursor buttons
the stitch density value "0.4" q (default setting).
Press the button to make the buttonhole stitch
denser w.
Press the button to make the buttonhole stitch less
dense e.
The stitch density can be varied from 0.3 to 0.8
depending on the selected buttonhole.

Round-End Buttonhole

Machine setting
q Stitch pattern:
w Needle thread tension:
e Presser foot:
Sewing procedure is the same as square buttonhole.
The stitch width can be varied from 2.5 to 5.5.
To change the stitch width or stitch density, refer to the
"Adjusting the stitch density" section above.

Keyhole Buttonhole

Machine setting
q Stitch pattern:
w Needle thread tension:
e Presser foot:
r Eyelet punch
Sewing procedure is the same as square buttonhole.
Use the seam ripper and an eyelet punch r to open the
buttonhole.
The stitch width can be varied from 5.5 to 7.0.
To change the stitch width or stitch density, refer to the
"Adjusting the stitch density" section above.
* An eyelet punch is an optional item.
to move the cursor under
to move the cursor under
10
1 to 5
Automatic buttonhole foot: R
11
1 to 5
Automatic buttonhole foot: R
w
w
w
q
q w
66
q
e
q
e
e
e
r