Applique; To Adjust The Stitch Width; Decorative Satin Stitches - Janome 49018 Manuel D'instructions

Applique

Machine setting
q Stitch pattern:
w Needle thread tension:
e Presser foot:
* The stitch width can be changed without changing its
center needle position.
Place an applique on the fabric and baste or pin it in place.
Sew while guiding the fabric so the needle falls along the
outer edge of the applique.
q Applique
w Outer edge

• To adjust the stitch width

Select pattern 16.
Press the cursor buttons
the stitch width value "3.5" e (default setting).
button to decrease the stitch width r.
Press the
button to increase the stitch width t.
Press the
The stitch width will be varied based on the centered
needle drop position y.
e Stitch width (3.5)
r Stitch pattern 31 (stitch width decreased)
t Stitch pattern 31 (stitch width increased)
y Center needle drop position
Decorative Satin Stitch
Machine setting
q Stitch pattern:
w Needle thread tension:
e Presser foot:
For a delicate appearance on fabric such as chiffon, use a
single layer with a tear-away backing, if necessary.
16
1 to 4
Satin stitch foot: F
to move the cursor under
17
3 to 6
Satin stitch foot: F
q w
q
q
w
58
e
w
e
y
r
t
e