To Adjust The Stitch Length; To Adjust The Needle Drop Position - Janome 49018 Manuel D'instructions

w
[1.0] [2.2]
q
w e
q
[5.0]
r

• To adjust the stitch length

Press the cursor buttons
under the stitch length value "2.2" w (default setting).
Press the button to decrease stitch length.
Press the button to increase stitch length.
The stitch length can be varied from 0.0 to 5.0.
q Cursor
w Stitch length (2.2)
NOTE:
Reverse stitch length cannot be set longer than 4.0.

• To adjust the needle drop position

The needle drop position can be adjusted for straight
stitch patterns 00 – 04.
Press the cursor buttons
under the stitch width value "3.5" q (default setting).
button to move the needle to the right r.
Press the
button to move the needle to the left w.
Press the
q Stitch width (3.5)
w Left (0.0)
e Middle (3.5)
r Right (7.0)
42
to move the cursor q
to move the cursor