Replacing The Bobbin Holder - Janome 49018 Manuel D'instructions

Replacing the Bobbin Holder

z Insert the bobbin holder into the hook race.
x Make sure the knob of the bobbin holder fits next to the
stopper on the race.
q Knob
w Stopper
c Replace the bobbin.
Attach the needle plate. Tighten the screw firmly with
the screwdriver.
e Screw
CAUTION:
Do not pull the fabric or turn the handwheel when threads
or fabric are tangled in the hook area.
Remove the needle plate in order to remove the tangled
threads.
CAUTION:
Do not apply oil to the bobbin holder or hook
area.
z
x
c
e
76
w
q